Welding, Cutting & Surface Engineering
Welding, brazing and surface engineering materials and equipment grouped by process: consumables for SMAW, TIG, MIG/MAG, FCAW and SAW; brazing alloys; hardfacing and wear protection; thermal spray and cladding powders; welding equipment; cutting and beveling; surface preparation.
Welding Consumables
SMAW electrodes, TIG rods, MIG/MAG wires, and FCAW and SAW consumables where supported.
Select a technical family
- Flux-Cored Welding Wire
- Cast-Iron Repair Electrodes
- Pure-Nickel Welding Electrodes
- Copper-Nickel Welding Electrodes
- Nickel-Copper Welding Electrodes
- Submerged Arc Welding Wires
- Submerged Arc Welding Fluxes
- Carbon & Low-Alloy Steel Electrodes
- Stainless Steel Electrodes
- Carbon Steel TIG Rods
- Stainless Steel TIG Rods
- Carbon Steel MIG / MAG Wire
- Stainless Steel MIG / MAG Wire
- AWS A5.1
- AWS A5.4
- AWS A5.18
- AWS A5.9
Brazing Alloys, Fluxes & Binders
Choose a silver, copper-phosphorus or nickel/composite filler, or select a separate flux or binder. Compare documented grades, powder cuts, viscosity ranges and packs, then configure the joint and application requirements.
Select a technical family
- Copper-Phosphorus Brazing Alloys
- Brazing Binders & Cements
- Nickel & Composite Brazing Alloys
- Silver Brazing Alloys
- Brazing Fluxes
- AWS A5.8
Hardfacing & Wear Protection
Choose coated electrodes, solid or cored wire, or separate sintered-square and continuous-cast round hardfacing rods. Compare documented chemistry, cross-sections, sizes, source length intervals, welding parameters and exact pack scope, then describe the substrate, wear duty and repair procedure.
Thermal Spray & Surface Engineering
Compare documented powder forms for thermal spraying, powder welding, spray and fuse, PTA, laser cladding and additive manufacturing. Select the exact material, particle fraction and process, then describe the actual substrate, procedure, equipment and service conditions.
Welding Equipment
Stick, TIG, MIG/MAG and multi-process welding machines.
Select a technical family
- Gas-Cooled MIG/MAG Torches
- Liquid-Cooled MIG/MAG Torches
- TIG Cold-Wire Feeders
- Wire Feeder Drive Rolls
- Wire Feeder Controls & Drive Gears
- Gas-Cooled TIG Torch Bodies & Necks
- Liquid-Cooled TIG Torch Bodies & Necks
- Submerged-Arc Welding Tractor Carriages
- MMA / Stick Welding Machines
- TIG Welding Machines
- MIG/MAG Welding Machines
- Multi-Process Welding Machines
Cutting & Beveling
Orbital pipe cutters, cold cutting and beveling equipment, manual plasma and related tooling.
Select a technical family
Fume Extraction & Dust Collection
Capture welding fumes and process dust at the source. Select extraction arms, filters and industrial vacuums for the actual process, contaminant and installation.
Surface Preparation
Abrasive blasting systems, suction and pressure cabinets, air treatment and blast recovery. Compare sizes, process and site requirements.
Select a technical family
Request a quote for Welding, Cutting & Surface Engineering
Send the specification, quantities and delivery location; we review it against your requirement and reply with a quotation.