Brazing Binders & Cements

Compare four solvent-binder viscosity ranges, a water-based liquid binder and a water-based gel for extrudable paste. Review the documented 1, 3 or 4 kg packs, then specify the formulation and dispensing conditions you need.

Configure your requirements
Representative liquid and gel binder containers; formulation, viscosity, colour and pack capacity are confirmed separately.
Representative liquid and gel binder containers; formulation, viscosity, colour and pack capacity are confirmed separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

11 documented configurations. Review one specification at a time; your custom requirements are retained.

Solvent binder · 250–350 cP · 1 kg

Reference liquid binder and can mass. The source viscosity table gives no test temperature. Approximate volatilization is a process observation, not a service limit or a universal furnace cycle. Confirm the actual binder and current SDS.

Binder system
Solvent-based liquid vehicle / binder
Viscosity
250–350 cP
Viscosity test temperature
Not stated in the source table
Reference package
1 kg can
Approximate complete volatilization
540°C (1000°F)
Document revision
February 2025
Thinning medium
Source-matched solvent thinner; compatibility to be confirmed
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Specify both base materials, exact grades, joint geometry, dispensing equipment and the approved brazing procedure.

Selection guidance

Binders hold filler powder during application; they are separate from filler alloy and flux. Choose the liquid or gel system, then define required viscosity with its test temperature, powder grade, mixing basis, drying cycle and compatible diluent.

Technical notes

Reference facts remain separate from requested dimensions, process conditions and packaging. Unlisted requirements stay usable; quotation confirms the actual supplied execution and current documentation.