Choose a silver, copper-phosphorus or nickel/composite filler, or select a separate flux or binder. Compare documented grades, powder cuts, viscosity ranges and packs, then configure the joint and application requirements.
Filler metals
Compare documented grades and forms, then enter base materials, joint geometry, dimensions and heating conditions.
Compare BCuP-3 and BCuP-5 references: 5% and 15% silver in documented 0.050 × 1/8 inch flat, 8-stick tubes. Specify round diameter or flat-strip thickness and width, then the required cut length.
2 documented reference configurations
Specifications & configuration →Compare BNi-5 and BNi-5b powder cuts, plus two nickel/chromium/phosphorus/copper composite powders. Specify particle size, filler form, base materials, joint clearance and furnace conditions.
6 documented reference configurations
Specifications & configuration →Compare BAg-5 and BAg-7 references: 45% and 56% silver, each in a documented 1/16 inch round, 5-stick tube. Specify the diameter, cut length, filler form and packaging you need.
2 documented reference configurations
Specifications & configuration →Application aids
Flux and binder serve different purposes. Define the required flux or binder system and its application conditions separately from the filler alloy.
Compare four solvent-binder viscosity ranges, a water-based liquid binder and a water-based gel for extrudable paste. Review the documented 1, 3 or 4 kg packs, then specify the formulation and dispensing conditions you need.
11 documented reference configurations
Specifications & configuration →Compare white FB3-A and black FB3-C paste fluxes by activity range and container size. White references include 6.5 oz, 7 oz and selected 1/4–60 lb packs; black references include selected 1/2–60 lb jars and pails. Select liquid or gel binders separately under Brazing Binders & Cements.
13 documented reference configurations
Specifications & configuration →