Buildings & HVAC
Temperature, humidity, indoor conditions and equipment status support building-management workflows. Identify the BMS interface, local controls and required trends.
Connected infrastructure
Smart Cities. Connected Operations.
Bring buildings, utilities, mobility and energy into a clear monitoring architecture—from field measurements to the operations centre.
A clearer view of connected operations
Explore tagged equipment across building services, utilities and communications. Select an instrument, drag through its trend and compare readings at the same moment.
Maratej OperationsOperations overview
Building A · Air handling
Schedule activeAHU-201 · Building A. Select a sensor to inspect its trend. Filter pressure, fan demand and room conditions are separate points, not control commands.
Equipment & instrument points
Select equipment to inspect its trendSelected reading16.2 °C
Drag across the chart or move the time slider. Use arrow keys for precise selection.
Minimum Maximum 30-minute samples · 08:00–12:00
TT-201 · Supply-air temperature sensor · 12:00 · 16.2 °C
Information path
- Room sensor
- Controller / I/O
- BMS supervisor
- Operator HMI
Maratej OperationsSimulated readings · Interactive demonstration
View example event — AHU-201 · Filter inspection reminder
Example maintenance advisory: review the filter differential pressure and the equipment maintenance schedule. Alarm limits and response procedures belong to the selected installation.
Building A · Electrical monitoring
Meter reportingTR-101 · 400 V distribution board and PV-101 solar array. kW is instantaneous power; kWh is cumulative imported energy. Voltage peak is calculated as √2 × RMS for an ideal sine wave, not a measured transient.
Equipment & instrument points
Select equipment to inspect its trendSelected reading128 kW
Drag across the chart or move the time slider. Use arrow keys for precise selection.
Minimum Maximum 30-minute samples · 08:00–12:00
PM-101 · Power analyzer · active demand · 12:00 · 128 kW
Information path
- Meter / analyzer
- Data interface
- Trend storage
- Energy dashboard
Maratej OperationsSimulated readings · Interactive demonstration
View example event — PM-101 · Demand advisory
An example demand event helps an operator inspect the trend and connected load. It does not demonstrate savings, meter accuracy or an automatic load-control function.
Utility station · Tank monitoring
Reading receivedUtility station 01 · From the booster pump through filtration to distribution. Flow, line pressure, filter DP and tank level retain separate tags and units.
Equipment & instrument points
Select equipment to inspect its trendSelected reading12.6 m³/h
Drag across the chart or move the time slider. Use arrow keys for precise selection.
Minimum Maximum 30-minute samples · 08:00–12:00
FIT-101 · Electromagnetic flow meter · 12:00 · 12.6 m³/h
Information path
- Process sensor
- Data logger
- Communications
- Utility dashboard
Maratej OperationsSimulated readings · Interactive demonstration
View example event — LT-101 · Level trend review
This example links a tank-level trend with an operator review. Sensor range, process suitability, alarm limits and independent protective functions are selected for the actual site.
District network · Gateway overview
One delayed deviceDistrict 01 · Separate cellular, LoRaWAN and NB-IoT links report to the operations center. Device 25 has a delayed report from 10:30. Network paths shown here are illustrative, not a claim of universal interoperability.
Equipment & instrument points
Select equipment to inspect its trendSelected reading-77 dBm
Drag across the chart or move the time slider. Use arrow keys for precise selection.
Minimum Maximum 30-minute samples · 08:00–12:00
GW-101 · Cellular / GSM gateway · RSSI · 12:00 · -77 dBm
Information path
- Field devices
- Network / gateway
- Receiving platform
- Operator overview
Maratej OperationsSimulated readings · Interactive demonstration
View example event — DEV-025 · Reading delayed
The example highlights a missing report for investigation. Check device power, time stamps and network coverage. NB-IoT, cellular and LoRaWAN require their own compatible device and network selection.
Example values only; this interface is not connected to equipment and does not issue control commands.
One city. Connected information.
Define what each asset measures, how its readings travel and who needs to act on them. Select devices and integration around the operating requirement.
Energy, solar & metering
Electricity meters and power analyzers track selected electrical parameters. Solar monitoring combines inverter, meter and site data through supported interfaces.
Parking & mobility
Parking occupancy sensors and gateway coverage provide the input for availability monitoring. Define detection method, reporting intervals and integration needs.
Water & utilities
Flow, pressure, tank level and leak-detection requirements connect utility assets to the monitoring view. Match the device to the medium and installation.
Communications & data loggers
NB-IoT, LTE-M, cellular/GSM and LoRaWAN are different connectivity options. Check operator support, coverage, bands, power and payload needs; select compatible gateways and data loggers.
Operations centre
Consolidate authorised readings into dashboards, trends and alerts. Define device identities, retention, access roles, network segmentation and BMS/platform interfaces.
Monitoring links do not replace local safety controls. Protocols, gateways and platforms must be checked together for the selected devices and network.
Compressed Air, from Generation to Point of Use
Coordinate the compressor, treatment train and distribution network around actual demand, pressure and required air quality.
Generation & storage
Compressor, aftercooler, water separator and receiver sized for demand and duty.
Prefiltration
Select particulate and coalescing protection for the dryer and downstream process.
Drying
Choose refrigerated or desiccant drying for the required pressure dew point and operating conditions.
Afterfiltration
Where required, remove dryer dust and select final filtration for the process.
Distribution
Ring main, isolation valves, drops, drains, couplings and hoses matched to pressure, flow and installation.
Point of use
Confirm local pressure and air-quality requirements for each machine, tool and process.
Industrial productionFood & beverage processingWorkshops & maintenance
Illustrative arrangement; the final filter sequence, receiver locations and treatment depend on equipment instructions and the application. Collect and treat condensate separately. Food-contact air requires a defined and verified purity specification.
System design considerations
Follow the measurement through the system
-
Field devices
Meters and sensors measure electricity, water, flow, pressure and level. Measurement principle, process conditions and configuration define the starting point.
Metering · Sensing · Process interfaces
-
Connectivity
Devices transfer readings through an appropriate interface or gateway. NB-IoT, LTE-M, cellular/GSM and LoRaWAN are connectivity options whose suitability depends on the device, network and site.
Interfaces · Gateways · Network coverage
-
Platform
The receiving system organises device identities, readings and integration interfaces. Data ownership, access and the required connection to other systems belong in the design brief.
IoT / IIoT · Integration · Data management
-
Insight
Dashboards, trends, alerts and analytics turn the available measurements into useful operational information. Asset visualisation and digital-twin requirements need a defined data and system scope.
Dashboards · Alerts · Analytics
Application guidance describes system requirements. Exact compatibility, approvals and deliverables depend on the selected equipment and agreed project scope.
Application context
Start with the application
Water networks & utilities
Connect flow and utility water metering with pressure, level and leak-detection requirements. Define the medium, installation, reading interval, power source and communications path. Metering technology and network design remain separate selections.
- Flow and water measurement
- Pressure and tank-level context
- Reading interfaces and communications
Electricity & power monitoring
Bring electrical measurement into a monitoring architecture. Identify the electrical system, measurement point, required parameters and transformer inputs, then define the interface and destination for the readings.
- Electrical measurement and power monitoring
- System and transformer inputs
- Data interfaces and monitoring requirements
Homes, buildings & Smart Cities
Water and power networks, meters, sensors and gateways form the field layer of connected buildings and city systems. A useful brief identifies each measurement point and follows its information through communications to the platform and operator view.
- Water and electricity metering
- Sensors, gateways and connectivity
- Dashboards, alerts and asset context
Industrial monitoring
Combine process measurements with plant context. Pressure, temperature, flow and level signals may serve different systems, so process suitability, communications and access requirements must be checked for the actual devices and installation.
- Process duty and measurement range
- Signal and protocol compatibility
- Operator information and integration boundaries
Related product categories
Maratej Trading Company