Compressed-air components
Start with the product type. Compare documented dimensions, pressure and operating conditions, then add the requirements for your application or replacement parts.
Profile-body cylinders for linear motion, clamping and machine automation. Compare bore and stroke as separate dimensions, then specify load, mounting, cushioning and site air supply.
14 documented configurations
Compact cylinders for limited installation space. Review the exact bore, stroke and speed limits, then specify mounting, load and sensing requirements.
16 documented configurations
Select a valve by its circuit function and return behaviour before checking port size, flow and supply. Compare 3/2, 5/2 and 5/3 body references with their own minimum operating pressure.
14 documented configurations
Compare 5 and 25 µm particle filters by connection size, drain type, bowl volume and pressure limits. Choose filtration for the point of use and the installed air-treatment chain.
10 documented configurations
Select the inlet connection and regulated outlet range, then specify flow and acceptable pressure variation. Compare relieving regulators with 0.5–4 and 0.5–10 bar setting ranges.
10 documented configurations
Meter oil into an air line only where the downstream tool or actuator requires it. Compare reservoir volume and the minimum flow needed to activate lubrication.
5 documented configurations
Build an air-preparation assembly from compatible modules. Compare a documented three-module arrangement, then specify filtration, pressure regulation, lubrication and isolation requirements.
5 documented configurations
Compare straight male push-in fittings by tube outside diameter, thread, overall length and spanner clearance. Request other forms with the same level of dimensional detail.
16 documented configurations
Choose polyurethane tube by outside and inside diameter, bend radius, operating temperature and pressure. Specify required length, colour and routing conditions.
7 documented configurations
Open the relevant product type and choose “Spare parts for existing equipment”. Include the manufacturer, model, serial or asset number, part number and dimensions. These details stay with your RFQ.
