Filter, Regulator & Lubricator Assemblies

Build an air-preparation assembly from compatible modules. Compare a documented three-module arrangement, then specify filtration, pressure regulation, lubrication and isolation requirements.

Configure your requirementsRequest spare parts →
Representative illustration of the product type; dimensions and supplied accessories are defined separately.
Representative illustration of the product type; dimensions and supplied accessories are defined separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

5 documented configurations. Review one specification at a time; your custom requirements are retained.

G3/8 · three-module filter / regulator / lubricator

Matched three-module assembly with separate filter, regulator and lubricator. It is not a universal mix-and-match kit. Lockable isolation, soft start, coalescing filtration and other combinations require their own selection.

Port thread
G3/8
Modules
5 µm filter + relieving regulator + lubricator
Filter / oil capacity
55 / 170 cm³
Regulated setting range
0.5–10 bar
Oil
ISO VG 32; maintain lubrication once used
Mounting
Vertical in-line / wall clamps / panel
Temperature / pressure
−5–50°C at ≤16 bar; −5–60°C at ≤10 bar, subject to every module
Assembly selection
Final pressure and flow must satisfy all modules and the chosen drain
Datasheet revision
2026/01
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Machine air-inlet stations and point-of-use preparation where regulated, lubricated air is required.

Selection guidance

Specify each module and its duty rather than selecting by port alone. Include inlet/outlet threads, required air quality, filter grade, drain, regulated pressure, flow, gauge, mounting and whether lubrication is permitted.

Technical notes

The assembly limit is constrained by every module and drain execution. A 5 µm particle filter is not a coalescing filter. Isolation or soft-start modules do not automatically provide a safety function for the machine.