ISO 15552 Profile Cylinders

Profile-body cylinders for linear motion, clamping and machine automation. Compare bore and stroke as separate dimensions, then specify load, mounting, cushioning and site air supply.

Configure your requirementsRequest spare parts →
Representative iso 15552 profile cylinders illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.
Representative iso 15552 profile cylinders illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

14 documented configurations. Review one specification at a time; your custom requirements are retained.

ISO 15552 · 32 mm bore × 50 mm stroke

Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.

Bore
32 mm
Stroke
50 mm
Action
Double acting; magnetic piston
Cushioning
Adjustable pneumatic cushioning
Operating pressure
1–10 bar
Temperature
0–80°C; dry air required below 0°C, minimum −20°C
No-load piston speed
10–1000 mm/s
Cylinder body
Anodized aluminium profile
Rod material
Rolled AISI 420B stainless steel
Seal material
Polyurethane
Air preparation
Filtered air; if lubricated, use ISO VG 32 continuously
Datasheet revision
2026/08
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Machine automation, packaging, fixtures and linear transfer. State load direction, travel speed and cycle rate.

Selection guidance

Choose from documented 32, 40, 50, 63, 80, 100 and 125 mm bores. The examples pair each bore with 50 or 200 mm stroke. Specify other strokes separately, together with foot, flange, clevis or trunnion mounting and the existing interface dimensions.

Technical notes

The standard pressure, seal and temperature limits shown do not apply automatically to low-friction, low-temperature, single-acting or through-rod executions. Source special strokes up to 2500 mm are on request, not a stock-size promise.