Hardfacing Solid Wire

Compare copper-coated S Fe 8 solid wire in 0.8, 1.0, 1.2 and 1.6 mm for GMAW. Check the documented gas and polarity choices; the listed 15 kg B300 pack belongs to the 1.2 mm execution.

Configure your requirements
Representative wire spool; classification, diameter, spool standard and net mass are specified separately.
Representative wire spool; classification, diameter, spool standard and net mass are specified separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

4 documented configurations. Review one specification at a time; your custom requirements are retained.

S Fe 8 solid wire · 0.8 mm

Reference solid-wire diameter, polarity and gas classifications. The source documents a 15 kg B300 pack specifically for 1.2 mm. Other listed diameters have no documented pack mass in this sheet; confirm packaging in the quotation. Conflicting source hardness values are held and omitted.

Wire classification
EN 14700: S Fe 8
Material number
1.4718
Form
Copper-coated solid wire for GMAW
Nominal analysis (wt%)
C 0.5%; Si 2.3%; Mn 0.5%; Cr 9.0%; Fe balance
Wire diameter
0.8 mm
Polarity
DC (+)
Shielding gas (EN ISO 14175)
M12 / M13 / M21 / C1
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Specify the worn component, substrate grade, wear mechanism and service conditions. Describe abrasion, impact, compression, temperature and corrosion separately.

Selection guidance

Choose a documented reference or enter an unlisted requirement. Specify the repair procedure, buffer layers, dilution, preheat/interpass conditions and finishing. Hardness alone does not establish suitability.

Technical notes

Published size and parameter facts remain separate from your requested specifications. Final alloy, process, packaging and documents are confirmed in the quotation. No automatic qualification, stock or guaranteed deposit performance is implied.