Source-backed reference

HCS.180 HSS Annular Cutter — 18 mm × 30 mm DoC

Reference information only. Confirm the actual equipment, configuration and supplied contents in the quotation. This reference does not confirm stock, installed compatibility or a certified supplied item.

Enquire about this reference
Source reference illustration
Retained source illustration. Generic manufacturer illustration; not an exact model photograph.

Reference overview

Euroboor HCS.180 is an 18 mm high-speed-steel annular cutter with 30 mm depth of cut and a 19.05 mm Weldon connection. The HSS 30 mm series is intended for single-layer drilling; the manufacturer explains that the resulting slug rim prevents penetration into a second layer. Select the pilot pin, lubricant and cutting procedure for the workpiece and machine.

Recorded reference facts

Exact order identity
HCS.180; manufacturer article 21003001801004; EAN 8718375390368Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting material
high speed steelExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting diameter
18 mmExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Depth of cut
30 mmExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Connection
3/4 in (19.05 mm) WeldonExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Series-specific application condition
HSS 30 mm teeth are optimized for single-layer workpieces; the slug rim prevents entering a second layer.Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Applications

  • Single-layer plate or pipe drilling where the selected HSS cutter and machine are suitable.
  • Manufacturer series-level application examples include steel, copper, aluminium, stainless steel and plastic; material condition and procedure require confirmation.

Configurations

  • HCS.180 · Scope: 18 mm diameter × 30 mm metric DoC; 19.05 mm Weldon; high speed steel only.