مرجع موثق من المصدر

HCS.180 HSS Annular Cutter — 18 mm × 30 mm DoC

معلومات مرجعية فقط. يجب تأكيد المعدات الفعلية والتكوين ومحتويات التوريد في عرض السعر. لا يثبت هذا المرجع المخزون أو التوافق مع المعدات المركبة أو اعتماد القطعة الموردة.

استفسر عن هذا المرجع
صورة توضيحية مرجعية
صورة توضيحية من المصدر المحفوظ. رسم توضيحي عام من الشركة المصنّعة؛ ليس صورة لطراز محدد.

نبذة عن المرجع

Euroboor HCS.180 is an 18 mm high-speed-steel annular cutter with 30 mm depth of cut and a 19.05 mm Weldon connection. The HSS 30 mm series is intended for single-layer drilling; the manufacturer explains that the resulting slug rim prevents penetration into a second layer. Select the pilot pin, lubricant and cutting procedure for the workpiece and machine.

البيانات المرجعية المسجلة

Exact order identity
HCS.180; manufacturer article 21003001801004; EAN 8718375390368Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting material
high speed steelExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting diameter
18 mmExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Depth of cut
30 mmExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Connection
3/4 in (19.05 mm) WeldonExact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Series-specific application condition
HSS 30 mm teeth are optimized for single-layer workpieces; the slug rim prevents entering a second layer.Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

التطبيقات

  • Single-layer plate or pipe drilling where the selected HSS cutter and machine are suitable.
  • Manufacturer series-level application examples include steel, copper, aluminium, stainless steel and plastic; material condition and procedure require confirmation.

التكوينات

  • HCS.180 · Scope: 18 mm diameter × 30 mm metric DoC; 19.05 mm Weldon; high speed steel only.