Request a Quote

Discuss a Project or describe your requirements below. We'll review your specification, confirm availability and reply with a quotation.

HCS.180 HSS Annular Cutter — 18 mm × 30 mm DoC

The recorded reference below stays separate from the equipment, spare part and specifications you request.

Selected catalogue reference

Euroboor HCS.180 is an 18 mm high-speed-steel annular cutter with 30 mm depth of cut and a 19.05 mm Weldon connection. The HSS 30 mm series is intended for single-layer drilling; the manufacturer explains that the resulting slug rim prevents penetration into a second layer. Select the pilot pin, lubricant and cutting procedure for the workpiece and machine.

Exact order identity
HCS.180; manufacturer article 21003001801004; EAN 8718375390368

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Cutting material
high speed steel

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Cutting diameter
18 mm

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Depth of cut
30 mm

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Connection
3/4 in (19.05 mm) Weldon

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Series-specific application condition
HSS 30 mm teeth are optimized for single-layer workpieces; the slug rim prevents entering a second layer.

Exact HCS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Reference applications
  • Single-layer plate or pipe drilling where the selected HSS cutter and machine are suitable.
  • Manufacturer series-level application examples include steel, copper, aluminium, stainless steel and plastic; material condition and procedure require confirmation.
Reference configurations
  • HCS.180 · Scope: 18 mm diameter × 30 mm metric DoC; 19.05 mm Weldon; high speed steel only.

Requested values remain separate from recorded product specifications.

Describe the actual equipment or spare part, installed maker/model/serial, quantities, units and specifications you need.

1. Contact & company details

Tell us who to contact and where your company is based. Fields marked * are required.

Choose the calling country, then enter your national phone number. Your phone country may differ from your company country.

Company address Optional

2. Product / equipment details
3. Technical & delivery requirements (optional)
Requirements
Requirement files (optional)

0 files selected

    Up to 5 files, 10 MB each. PDF, JPG/JPEG, PNG, WebP, CSV, XLSX or DOCX. Files are private and supplement your requirements. They are retained while your request is active and for 24 months after closure. Please reselect files if the form needs a correction.

    4. Review & submit

    Check your contact details, selected product and requirements before sending.

    We review your specification before confirming a quotation.