Explore equipment, consumables and technical specifications for industrial procurement. Select your requirements and request a quotation.
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 3/16 in (4.8 mm)
Request a quotation →
Continuous-Cast Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Continuous cast
- Cross-section
- Circular
- Nominal rod size
- 1/4 in (6.4 mm)
Request a quotation →
Continuous-Cast Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Continuous cast
- Cross-section
- Circular
- Nominal rod size
- 5/16 in (8.0 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 1/8 in (3.2 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 5/32 in (4.0 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 3/16 in (4.8 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 1/4 in (6.4 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 1/8 in (3.2 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 5/32 in (4.0 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 3/16 in (4.8 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 1/4 in (6.4 mm)
Request a quotation →
Sintered Nickel Hardfacing Rods
Reference configuration — confirm the required execution when enquiring.
Nominal chemical profile identifies this reference; it is not an AWS or other standardized grade designation. Size applies to the stated cross-section. Hardness is a source table reference without a stated test method, substrate or layer condition; final deposit hardness and suitability require confirmation. Dashes in the nominal analysis mean not specified, not zero. Rod length and packaging are confirmed in the quotation.
- Manufacturing form
- Sintered
- Cross-section
- Square
- Nominal rod size
- 5/16 in (8.0 mm)
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Aluminum Molybdenum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Aluminum Molybdenum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Aluminum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Aluminum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Aluminum
- Source wire diameters
- 1/8 in (3.2 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Aluminum Molybdenum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Aluminum Yttrium
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Aluminum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Iron
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Molybdenum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Nickel & Molybdenum Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Titanium
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Nickel Chrome Tungsten Carbide Iron
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
