Carbon & Low-Alloy Steel Electrodes

Compare E7018-1 H4R, modified E6018, E6013 and E6010 electrodes in 20 documented diameter and length combinations. Each reference retains its own current range, polarity and source revision.

Configure your requirements
Representative covered-electrode image. Classification, diameter and length are specified in the selected reference below. Representative covered-electrode form only. AWS classification, diameter, length and packaging are not established by this image.
Representative covered-electrode image. Classification, diameter and length are specified in the selected reference below. Representative covered-electrode form only. AWS classification, diameter, length and packaging are not established by this image.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

20 documented configurations. Review one specification at a time; your custom requirements are retained.

E6010 · 2.5 × 250 mm

One source-specific SMAW operating row; current range applies only to the stated diameter and length. Match base metal, joint and qualified welding procedure before quotation. Packaging and availability require confirmation. The source states DC+ with negative polarity for root pass, not a general DC+/- or AC rating. Linked datasheet revision09/2021 is retained.

AWS classification
E6010
AWS specification
A5.1 / SFA-5.1
EN ISO classification
2560-A: E 38 3 C 2 1
Process
SMAW
Coating
Cellulosic
Diameter
2.5 mm
Length
250 mm
Published current range
50–90 A
Polarity
DC+; DC- for root pass
Datasheet revision
09/2021
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details
Equipment identification

Identify the equipment for this application. Add nameplate photos or the equipment specification in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Fabrication, repair and industrial maintenance; final filler selection depends on base-metal grade, joint design and the qualified welding procedure.

Selection guidance

Choose the classification, then the documented diameter and length pair. E6018 (mod.) remains distinct from an unmodified E6018 request. For E6010, the source distinguishes normal DC+ operation from DC- root-pass operation. Enter your base-material grade, joint, position and qualified procedure separately.

Technical notes

Published sizes are specific reference executions. Packaging, batch certificates and delivery availability are confirmed with the quotation. Requirements for another grade or size remain visible separately.

Specification guide

Compare the specifications of each listed model for the intended application.

  • Welding position
  • Alloy System
  • AWS Classification
  • Electrode Coating Type
  • Electrode / Wire Diameter (mm)
  • Pack / Spool Weight (kg)