Silver Brazing Alloys

Compare BAg-5 and BAg-7 references: 45% and 56% silver, each in a documented 1/16 inch round, 5-stick tube. Specify the diameter, cut length, filler form and packaging you need.

Configure your requirements

Representative round and flat brazing filler forms; composition, dimensions and supplied packaging are specified separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

56% silver · 1/16 in round · 5-stick tube

Reference alloy and retail pack. Dimensions are in inches; configure your required geometry and packaging below. Quotation confirms the supplied execution.

Filler classification: AWS A5.8: BAg-7
Silver content (nominal): 56%
Nominal composition: Ag 56%; Cu 22%; Zn 17%; Sn 5%
Form: Bare filler rod
Cross-section: Round
Diameter: 1/16 in
Reference package: 5-stick tube
Solidus: 618°C
Liquidus: 652°C

Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Documented alloy / flux and package

Required filler classification / standard and edition

Required filler form / coating

Required round rod / wire diameter (mm)

Required flat-strip thickness (mm)

Required flat-strip width (mm)

Required rod / cut length (mm)

Required joint clearance at brazing temperature (mm)

Additional dimensions and application details

Brazing procedure reference

Required brazing temperature / heating cycle

Finished-joint service medium / temperature / conditions

Required flux / flux-free atmosphere

First base metal and exact grade

Second base metal and exact grade

Application and joint geometry

Required heating process

Required mass per pack (kg)

Required packaging and quantity per container

Required certificates and lot traceability

Existing material manufacturer

Existing grade or order code

Other requirements

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Specify both base metals, exact grades, joint geometry and heating process. Phosphorus-bearing filler references are not for steel or other ferrous metals; flux selection depends on the exact materials and process.

Selection guidance

Choose a documented reference or enter your own requirement. Reference melting points and flux activity ranges are different from finished-joint service limits. Confirm the exact supplied alloy, flux, procedure and current safety documentation.

Technical notes

Reference facts remain separate from requested geometry, temperature, packaging and certificates. Nickel/aluminium and other specialist alloys, binder formulations and unlisted sizes can be requested; they are not established by the shown references.