Nickel & Composite Brazing Alloys

Compare BNi-5 and BNi-5b powder cuts, plus two nickel/chromium/phosphorus/copper composite powders. Specify particle size, filler form, base materials, joint clearance and furnace conditions.

Configure your requirements
Representative brazing powder and container; not an exact alloy, particle size or pack capacity.
Representative brazing powder and container; not an exact alloy, particle size or pack capacity.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

6 documented configurations. Review one specification at a time; your custom requirements are retained.

BNi-5 · 140F mesh (106F micron)

Reference powder execution. Nominal chemistry and source particle-size designations are retained as published. Thermal data shown for BNi-5 are not transferred to BNi-5b or treated as joint service limits.

Filler classification
AWS A5.8: BNi-5
Nominal composition (wt%)
C ≤0.06%; Cr 19.0%; Si 10.0%; Ni balance
Form
Powder
Powder execution
140F mesh (106F micron)
Document revision
July 2021
Solidus
1080°C
Liquidus
1135°C
Suggested brazing range
1150–1205°C
Thermal analysis method
DSC
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Specify both base materials, exact grades, joint geometry, dispensing equipment and the approved brazing procedure.

Selection guidance

Choose a powder reference or request an unlisted powder, paste, rod, tape or sheet. Published mesh designations stay exact; requested custom dimensions are not evidence of a stocked execution. Melting and brazing ranges are not finished-joint service ratings.

Technical notes

Reference facts remain separate from requested dimensions, process conditions and packaging. Unlisted requirements stay usable; quotation confirms the actual supplied execution and current documentation.

Specification guide

Compare the specifications of each listed model for the intended application.

  • AWS Classification
  • Product Form
  • Alloy System