Portable Manual Plasma Cutting

Select mild steel, stainless steel or aluminium and thickness to compare manual plasma models. Review the cutting basis before choosing a configuration.

Configure your requirementsRequest spare parts →

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

6 documented configurations. Review one specification at a time; your custom requirements are retained.

Find models by material and thickness

Screens the published maximum separating thickness. Production-cut quality, piercing and material-specific performance require separate confirmation.

Kjellberg CUTi 35C · integrated compressor

Air plasma for electrically conductive materials. Maximum separating capacity is not a piercing or production-cut rating; confirm grade, finish and duty.

Maximum separating thickness
6 mm
Recommended cutting range
Confirm material and duty
Mains supply
1 × 230 V
Maximum cutting current
25 A
Air consumption reference
115 l/min
Air pressure reference
4 bar
Accessories
Wheel guide, circle cutting device, bevel cutting device, spacer spring, contact / bevel cap and torch-specific consumables. Select compatibility with the torch and current.
Connected load
3.3 kVA
Cutting current range
12–25 A
Slow-blow fuse
16 A
Duty-cycle reference
35% at 25 A; 100% at 20 A; ambient 40 °C
Dimensions L × W × H
550 × 150 × 245 mm
Source mass
12.5 kg
Technical source ↗ Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Add the nameplate, part photo or drawing in the RFQ attachments.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Equipment for industrial fabrication, maintenance and surface treatment. Select the process and the actual workpiece or surface conditions.

Selection guidance

Reference values describe the identified configuration. Enter required dimensions and operating conditions separately; accessories and the supplied package are confirmed in the quotation.

Technical notes

Request equipment, tooling or spare parts. For installed equipment, include manufacturer, model, serial number and part reference. Add drawings or identification photographs in the RFQ.