Liquid-Cooled TIG Torch Bodies & Necks

Compare documented TIG body and exchangeable-neck executions by cooling, head form and printed component version. Identify your installed torch or specify the complete assembly separately.

Configure your requirementsRequest spare parts →
Generic conceptual manual and machine TIG head illustration. Not an actual source body/neck, exact flexible/turnable/SC execution, dimension, cooling connection, complete cable/kit, wear part, electrical interface or installed-fit photograph.
Generic conceptual manual and machine TIG head illustration. Not an actual source body/neck, exact flexible/turnable/SC execution, dimension, cooling connection, complete cable/kit, wear part, electrical interface or installed-fit photograph.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

13 documented configurations. Review one specification at a time; your custom requirements are retained.

TIGBODY-19 · Exchangeable neck · Standard - 80.0 mm

Catalogue choice for a source-listed TIG body or neck. Actual complete-assembly compatibility, contents and installed spare remain independent.

Source component
Torch neck
Source cooling
Liquid cooled
Source body / neck version
Standard - 80.0 mm
Source application form
Turnable / exchangeable torch neck
Source model-level DC rating
400 A
Source model-level AC rating
280 A
Source model-level duty cycle
100 %
Source model-level tungsten diameter
1.6–4.8 mm
Rating scope
Exact source model-level block only; not a supplied-part certificate, arbitrary lead/connector/cooler assembly rating or pulse qualification.
Dimension scope
Printed version dimension describes the listed body or neck; not cable length or complete torch overall length.
Assembly scope
Body or neck article only. Complete torch cable, machine connector, controls, cooler and wear-part execution need separate verification.
Technical basis
Source technical data according to EN 60974-7; not supplied-item certification.
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Search a source body or neck, or leave blank for an actual installed spare. These references are not complete torch assemblies.

Request a complete torch, an actual installed spare or identification assistance.

State the actual required process independently. A source DC/AC model block does not qualify pulse settings or power-source compatibility.

Copy the actual required torch/body/neck maker, model and suffix independently of the catalogue choice.

State actual welding current and AC/DC conditions; the listed source model block is not a rating of an arbitrary complete assembly.

State the required percentage and duty basis in the notes. Source ratings do not establish pulse performance.

Enter actual millimetres independently of the source model-level electrode range.

Specify the actual electrode grade separately; no electrode chemistry is inferred from diameter.

Additional dimensions and application details

Specify the actual base material.

State the actual TIG shielding-gas requirement separately. A body reference does not establish gas composition, flow or procedure qualification.

State composition, flow and conditions; no flow value is inferred.

Enter actual complete cable assembly length in metres. Printed body/neck version dimensions are not lead lengths.

Specify the actual fixed or flexible execution; a fixed-head picture is not FLEX evidence.

State the required geometry separately; no FLEX angular range is inferred.

Identify actual power, gas and control interfaces. A rating or similar connector appearance is not compatibility.

Identify actual trigger, switch or remote module and interface.

Identify actual manual or cold/hot-wire feeding hardware independently; no feeder or attachment compatibility is implied.

For liquid-cooled requests identify actual cooler, circuit and connections for verification.

State actual requirements or attach the installed manual; no cooler capacity or fluid is inferred.

State the actual procedure and required approvals for review; none is inherited.

Describe actual operating conditions independently of the source rating.

List body, neck, leads, connectors, controls, cooler and wear parts separately. A source body article or illustration does not establish a complete kit.

Choose the actual component. A complete torch needs a separately verified cable, connector and control execution.

Enter actual millimetres separately from tungsten electrode diameter.

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Enter the actual installed maker.

Copy exact installed model and revision.

Include the actual serial number.

Copy the actual part number including all suffixes; no generic substitution is assumed.

Describe the actual spare independently of the torch reference.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

TIG torch body and neck replacement enquiries, plus separately specified complete manual or machine torch assemblies subject to exact interface verification.

Selection guidance

Search a reference or leave it blank for an actual installed part. Keep your required model, current, tungsten, head dimensions, cable, connectors and cooler independent.

Technical notes

Listed source articles identify bodies or necks, not complete cable assemblies. Model-level AC/DC ratings retain their exact source scope; grouped or unqualified variant ratings are not transferred. Printed component dimensions are not cable lengths.