Liquid-Cooled MIG/MAG Torches

Compare gas-specific current ratings, duty cycle, wire diameter, neck form and documented assembly lengths. Specify the actual machine interface, welding procedure and installed parts separately.

Configure your requirementsRequest spare parts →
Neutral source-derived illustration of the pictured fixed-neck torch head and handle. Not the complete3m,4m or5m assembly, connector, controls, included parts or installed-fit evidence.
Neutral source-derived illustration of the pictured fixed-neck torch head and handle. Not the complete3m,4m or5m assembly, connector, controls, included parts or installed-fit evidence.
Neutral source-derived illustration of the pictured fixed-neck torch head and handle. Not the complete3m,4m or5m assembly, connector, controls, included parts or installed-fit evidence.
Neutral source-derived illustration of the pictured fixed-neck torch head and handle. Not the complete3m,4m or5m assembly, connector, controls, included parts or installed-fit evidence.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

2 documented configurations. Review one specification at a time; your custom requirements are retained.

TOR-08 · 325 A CO2 / 300 A M21 · Fixed 50°

Exact documented torch execution. TOR identifiers are catalogue references, not manufacturer model codes. Enter actual equipment, connector and part identifiers independently.

Cooling
Liquid cooled
CO2 rating
325 A
Mixed gas M21 rating
300 A
Source duty cycle
100 %
Source wire diameter
0.8–1.2 mm
Source assembly lengths
3 m; 4 m; 5 m
Source neck form
Fixed 50°
Rating basis
Source technical data according to EN 60974-7; M21 designation according to DIN EN ISO 14175. Source conditions only, not supplied-item certification.
Configuration scope
Separate length-specific assemblies. Machine connector, controls, included wear parts, pulse/ambient rating and cooling circuit require verification for the actual installation.
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Choose a reference or leave blank for the actual torch or spare. Reference identifiers are catalogue choices, not maker model codes.

Request a complete torch, an actual installed spare or identification assistance.

Source ratings are MIG/MAG references. Pulse or another process requires separate applicability verification.

Copy the full required model and execution, independently of the reference.

Enter actual required amperes; gas and duty conditions must also be specified.

State the required percentage and duty basis in the notes. Source ratings do not establish pulse performance.

Enter the actual diameter independently of the source interval.

State actual wire grade and construction; source diameter does not establish alloy compatibility.

Additional dimensions and application details

Specify the actual base material.

Keep CO2 and M21 ratings distinct. Other gases require verification.

State composition, flow and conditions; no flow value is inferred.

Enter actual metres. The source lists separate3m,4m and5m assemblies; custom length is a buyer request.

Specify the actual fixed or flexible execution; a fixed-head picture is not FLEX evidence.

State the required geometry separately; no FLEX angular range is inferred.

Identify actual power, gas and control interfaces. A rating or similar connector appearance is not compatibility.

Identify actual trigger, switch or remote module and interface.

Provide actual feeder and wire-feed path; no cross-system compatibility is inherited.

For liquid-cooled requests identify actual cooler, circuit and connections for verification.

State actual requirements or attach the installed manual; no cooler capacity or fluid is inferred.

State the actual procedure and required approvals for review; none is inherited.

Describe actual operating conditions independently of the source rating.

Specify complete assembly, head only or individual parts and accessories; source photos do not establish contents.

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Enter the actual installed maker.

Copy exact installed model and revision.

Include the actual serial number.

Copy the actual part number including all suffixes; no generic substitution is assumed.

Describe the actual spare independently of the torch reference.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Manual MIG/MAG torch and replacement-assembly enquiries, subject to the actual power source, feeder, procedure and connection requirements.

Selection guidance

Search a documented reference, then enter the current, gas, wire, length and interface you need. Source ratings remain separate from your requirements.

Technical notes

References cover documented MIG/MAG executions only. Pulse ratings, ambient conditions, connector/control compatibility, included parts and cooling-system requirements must be verified for the actual installation.