Chromium-Carbide Overlay Wear Plates

Compare documented chromium-rich overlay plate profiles, with the wear layer and mild-steel backing shown separately. Specify the actual plate or liner you need.

Configure your requirementsRequest spare parts →
Generic overlay-plate illustration; not an actual source grade, layer thickness, hardness, microstructure, surface, dimensions, fabricated geometry, package or installed-fit photograph.
Generic overlay-plate illustration; not an actual source grade, layer thickness, hardness, microstructure, surface, dimensions, fabricated geometry, package or installed-fit photograph.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

7 documented configurations. Review one specification at a time; your custom requirements are retained.

OVL-01 · 3 mm overlay / 5 mm backing

Dated plate datasheet execution only. Source edition, supplied plate size/grade/tolerances and requested fabrication require confirmation. No source-pass-count, blanket flatness/temperature, local stock/fabrication, installed fit or certification inference.

Source product form
Arc-deposited chromium-rich hardfacing overlay plate
Source backing material
Mild steel
Nominal overlay thickness
3 mm
Nominal backing thickness
5 mm
Typical bulk surface hardness (HRC)
55–57 HRC
Typical bulk surface hardness (HV)
590–630 HV
Source abrasion test
ASTM G65 — Procedure A
Source surface weight loss
0.25 g max
Source weight loss at 75% overlay depth
0.25 g max
Hardness / abrasion qualification
Overlay thickness ≤5 mm source bin. Typical bulk surface hardness and source abrasion-test limits are not supplied-lot certification, carbide microhardness, field wear life or performance for another procedure.
Dimensional / fabrication qualification
Overlay and backing thickness remain separate nominal values. Specify actual plate size, backing grade, tolerances, cut/form/machining and installed interfaces independently; source edition, supplied plate and fabrication applicability must be confirmed.
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

Additional dimensions and application details

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

State the actual requirement independently of the reference. Confirm exact supplied plate, source edition, drawing, fabrication and installed fit.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Abrasive-wear plate and liner enquiries for moderate-to-low impact service, subject to the exact material, drawing and application review.

Selection guidance

Choose a nominal overlay/backing profile or leave the reference blank for an installed liner or custom part. Keep required material, size, hardness, drawing and fabrication independent.

Technical notes

References retain a dated plate datasheet scope. Confirm the applicable source edition and supplied plate; a separate dimensional program lists different profiles. Typical hardness and source abrasion-test limits are not supplied-lot certification or field life. Plate size, layer/pass count, temperature, flatness, cut/form geometry and installed fit are not inferred.