Brazing Binders & Cements

Compare four solvent-binder viscosity ranges, a water-based liquid binder and a water-based gel for extrudable paste. Review the documented 1, 3 or 4 kg packs, then specify the formulation and dispensing conditions you need.

Configure your requirements
Representative liquid and gel binder containers; formulation, viscosity, colour and pack capacity are confirmed separately.
Representative liquid and gel binder containers; formulation, viscosity, colour and pack capacity are confirmed separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

11 documented configurations. Review one specification at a time; your custom requirements are retained.

Water-based liquid binder · 375–475 cP at 25°C · 3 kg

Reference sprayable liquid binder. Drying times depend on the stated conditions and coating thickness. No universal powder/binder ratio, residue-free performance with every filler or volatilization temperature is inferred.

Binder system
Water-based liquid binder
Viscosity
375–475 cP at 25°C (77°F)
Reference package
3 kg package
Thinning medium
Distilled or deionized water
Room-temperature complete drying
Typically 50–60 minutes; depends on atmosphere and coating thickness
Heated drying
10–15 minutes at 93°C (200°F)
Document revision
August 2024
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements
Additional dimensions and application details

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Specify both base materials, exact grades, joint geometry, dispensing equipment and the approved brazing procedure.

Selection guidance

Binders hold filler powder during application; they are separate from filler alloy and flux. Choose the liquid or gel system, then define required viscosity with its test temperature, powder grade, mixing basis, drying cycle and compatible diluent.

Technical notes

Reference facts remain separate from requested dimensions, process conditions and packaging. Unlisted requirements stay usable; quotation confirms the actual supplied execution and current documentation.