Completion Sliding Sleeves

Sliding-sleeve configurations for tubing-to-annulus communication and completion flow control.

Configure your requirements
Sliding-sleeve drawings in closed, equalized and open positions; exact size and shifting direction require confirmation.
Sliding-sleeve drawings in closed, equalized and open positions; exact size and shifting direction require confirmation.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

Downshift-to-Open Sliding Sleeve, 2-3/8 in / كم منزلق يفتح بالإزاحة إلى الأسفل بمقاس 2-3/8 بوصة

Documented example execution; listed values apply only to this example. / مثال تنفيذ موثق؛ تنطبق القيم المدرجة على هذا المثال فقط.

Tubing size / مقاس الأنبوب
2-3/8 in
Seal bore / مجرى الإحكام
1.81 in
Maximum outside diameter / أقصى قطر خارجي
3.080 in
Total length / الطول الكلي
48.99 in
Opening direction / اتجاه الفتح
Shift down to open / إزاحة إلى الأسفل للفتح
Operation / التشغيل
Wireline shifting tool / أداة إزاحة بالوايرلاين
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Optional example only. Its values apply only to the stated execution; confirm the final configuration in your quotation.

Describe the operating task and installation context.

Include size, length, connection type and drawings where applicable; state units.

State working pressure, temperature and units. Distinguish working and test pressure.

Describe the fluid, well conditions and any corrosive or sour-service requirements.

For matching equipment, provide its maker, model, serial number, interface or drawing. Compatibility must be confirmed.

Specify required drawings, material records, test reports, standards and inspection scope. No certification is presumed.

State whether a complete item, assembly, accessory or spare part is needed, with part references if available.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Selection guidance

Specify the application, size, connection, operating pressure and temperature, fluid or service conditions, quantity and required documentation. Confirm the exact configuration before ordering.

Technical notes

The specification tables below describe documented example configurations only. Values are not interchangeable between executions; final dimensions, interfaces, materials and service requirements must be confirmed. Configuration enquiry only. Ratings, materials, connections and standards are specific to the selected execution and must be confirmed. No cross-model interchangeability or site approval is implied.