Casing Heads, Spools & Hangers

Casing-head, spool and hanger configurations for the specified wellhead assembly.

Configure your requirements
Casing-head housing, 11 in top flange, 9 5/8 in casing
Technical illustration: Casing-head housing, 11 in top flange, 9 5/8 in casing. Diagram not to scale; final configuration must be confirmed.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

Casing-head housing, 11 in top flange, 9 5/8 in casing / مبيت رأس غلاف، فلنجة علوية 11 بوصة وغلاف 9 5/8 بوصة

Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.

Top flange size / مقاس الفلنجة العلوية
11 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Casing size / مقاس الغلاف
9 5/8 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Working pressure / ضغط التشغيل
2,000 psi — Selected 2000-psi table group; source separately limits casing-thread connections by casing size. / مجموعة 2000 psi المحددة في الجدول؛ يحدد المصدر حدود وصلات قلاوظ الغلاف حسب المقاس.
Total height H / الارتفاع الكلي H
19 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Side-outlet height h / ارتفاع المخرج الجانبي h
6 1/2 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Minimum through bore A / أدنى قطر مرور A
9 1/8 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Optional example only. Its values apply only to the stated execution; confirm the final configuration in your quotation.

Describe the operating task and installation context.

Include size, length, connection type and drawings where applicable; state units.

State working pressure, temperature and units. Distinguish working and test pressure.

Describe the fluid, well conditions and any corrosive or sour-service requirements.

For matching equipment, provide its maker, model, serial number, interface or drawing. Compatibility must be confirmed.

Specify required drawings, material records, test reports, standards and inspection scope. No certification is presumed.

State whether a complete item, assembly, accessory or spare part is needed, with part references if available.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Selection guidance

Specify the application, size, connection, operating pressure and temperature, fluid or service conditions, quantity and required documentation. Confirm the exact configuration before ordering.

Technical notes

The specification tables below describe documented example configurations only. Values are not interchangeable between executions; final dimensions, interfaces, materials and service requirements must be confirmed. Configuration enquiry only. Ratings, materials, connections and standards are specific to the selected execution and must be confirmed. No cross-model interchangeability or site approval is implied.