Pneumatic Push-In Fittings

Compare straight male push-in fittings by tube outside diameter, thread, overall length and spanner clearance. Request other forms with the same level of dimensional detail.

Configure your requirementsRequest spare parts →
Representative pneumatic push-in fittings illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.
Representative pneumatic push-in fittings illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

16 documented configurations. Review one specification at a time; your custom requirements are retained.

Straight male · 10 mm tube × G1/2

One metric tube / male-thread combination from the dimension table. M5 is a metric thread; G threads are parallel BSPP. Neither implies NPT interchangeability. Tube limits may be lower than the fitting envelope.

Tube outside diameter
10 mm
Port thread
G1/2
Fitting form
Straight male push-in
Overall length L
25 mm
Spanner size SW
22 mm
Body material
Nickel-plated brass
Pressure envelope
−0.9–16 bar; subject to tube material and working conditions
Temperature envelope
−20–80°C; subject to tube material and working conditions
Compatibility
Confirm tube material, OD tolerance, thread, sealing and medium
Datasheet revision
2026/02
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Connections for pneumatic tube circuits and machine air distribution.

Selection guidance

Documented tube ODs here are 4, 6, 8, 10, 12, 14 and 16 mm. Specify both tube OD and thread; include elbow, tee, union, bulkhead, reducer or swivel form when a straight fitting does not suit the installation. Those other forms require separate source selection.

Technical notes

Tube OD is not thread size or tube ID. G/BSPP, R/BSPT, NPT and metric threads must be identified correctly. The fitting envelope is not a blanket tube rating, and fitting/tube compatibility is confirmed for the actual materials and conditions.