Air-Line Lubricators

Meter oil into an air line only where the downstream tool or actuator requires it. Compare reservoir volume and the minimum flow needed to activate lubrication.

Configure your requirementsRequest spare parts →
Representative air-line lubricators illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.
Representative air-line lubricators illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

5 documented configurations. Review one specification at a time; your custom requirements are retained.

G3/8 · 170 cm³ oil reservoir

Oil-mist lubrication reference. Minimum activation flow is not maximum delivery flow. Use only when the downstream equipment requires lubrication; once lubrication is adopted it must be maintained.

Port thread
G3/8
Oil capacity
170 cm³
Minimum flow at 1 bar
17 l/min
Minimum flow at 6 bar
38 l/min
Oil grade
ISO VG 32
Refill
Oil can be added during operation
Mounting
Vertical in-line or wall
Temperature
−5–50°C at ≤16 bar; −5–60°C at ≤10 bar
Flow direction
Left to right reference; reverse direction is a separate execution
Datasheet revision
2026/01
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Lubricated air circuits and equipment whose instructions explicitly require oil-mist supply.

Selection guidance

Specify connection, minimum and maximum flow, pressure, oil grade, duty cycle and refill arrangement. Confirm whether the equipment is designed for non-lube service before adding a lubricator.

Technical notes

The published minimum flow at 1 or 6 bar is an activation threshold. It does not indicate maximum flow or oil consumption. Keep lubricated and non-lubricated branches appropriately separated.