Hydraulic Fluids

Compare anti-wear hydraulic oil references from ISO VG 10 to 100. Specify the pump, OEM fluid requirement, system pressure, reservoir capacity, oil temperature and cleanliness target.

Configure your requirements
Representative lubricant containers and oil sample; grade, colour, pack format and capacity are confirmed separately.
Representative lubricant containers and oil sample; grade, colour, pack format and capacity are confirmed separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

6 documented configurations. Review one specification at a time; your custom requirements are retained.

ISO VG 46 · anti-wear hydraulic oil

Typical reference properties at the stated laboratory test conditions. Confirm the exact supplied oil against the equipment specification.

Viscosity grade
ISO VG 46
Fluid type
Anti-wear hydraulic oil
Reference application
Industrial hydraulic system
Kinematic viscosity at 40°C (ASTM D445)
46.2 mm²/s
Kinematic viscosity at 100°C (ASTM D445)
7.1 mm²/s
Viscosity index (ASTM D2270)
110
Flash point, COC (ASTM D92)
238°C
Pour point (ASTM D97)
-33°C
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Enter the OEM grade, including unlisted ISO VG or another viscosity system.

For example mineral, synthetic hydrocarbon or a separately specified fluid. Equal viscosity does not establish interchangeability.

Additional dimensions and application details

Packaging request only; available pack sizes are confirmed in the quotation.

Specify separately; these properties are not established by the shown anti-wear oil references.

Equipment identification

Identify the equipment for this application. Add nameplate photos or the equipment specification in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Provide the equipment maker, model, current lubricant and service conditions. Identify any special fire-resistance, food-contact, environmental or seal-compatibility requirements separately.

Selection guidance

Choose a documented grade or enter an unlisted requirement. Match the complete OEM lubricant specification, fluid chemistry and application; viscosity grade alone does not establish suitability.

Technical notes

Flash and pour points are laboratory properties, not operating temperature limits. Specify actual operating conditions, litres and packaging independently. Supply grade, current SDS, pack sizes and any required approvals are confirmed in the quotation.