Source-backed reference

HMS.180 TCT Annular Cutter — 18 mm × 35 mm DoC

Reference information only. Confirm the actual equipment, configuration and supplied contents in the quotation. This reference does not confirm stock, installed compatibility or a certified supplied item.

Enquire about this reference
Source reference illustration
Retained source illustration. Generic manufacturer illustration; not an exact model photograph.

Reference overview

Euroboor HMS.180 is an 18 mm tungsten-carbide-tipped annular cutter with 35 mm depth of cut and a 19.05 mm Weldon connection. Its manufacturer series uses spiral flutes for chip removal and lists hardened steels, stainless steels and high-tensile steels among its applications. Confirm the workpiece grade, hardness, machine and cutting procedure before ordering.

Recorded reference facts

Exact order identity
HMS.180; manufacturer article 23003501801004; EAN 8718375393857Exact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting material
tungsten carbide tippedExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting diameter
18 mmExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Depth of cut
35 mmExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Connection
3/4 in (19.05 mm) WeldonExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Series geometry
Manufacturer describes a spiral flute for chip removal in the TCT 35 mm series.Exact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

Applications

  • Annular drilling in the manufacturer-listed hardened, stainless and high-tensile steel application scope after checking the exact grade and procedure.

Configurations

  • HMS.180 · Scope: 18 mm diameter × 35 mm metric DoC; 19.05 mm Weldon; tungsten carbide tipped only.