مرجع موثق من المصدر

HMS.180 TCT Annular Cutter — 18 mm × 35 mm DoC

معلومات مرجعية فقط. يجب تأكيد المعدات الفعلية والتكوين ومحتويات التوريد في عرض السعر. لا يثبت هذا المرجع المخزون أو التوافق مع المعدات المركبة أو اعتماد القطعة الموردة.

استفسر عن هذا المرجع
صورة توضيحية مرجعية
صورة توضيحية من المصدر المحفوظ. رسم توضيحي عام من الشركة المصنّعة؛ ليس صورة لطراز محدد.

نبذة عن المرجع

Euroboor HMS.180 is an 18 mm tungsten-carbide-tipped annular cutter with 35 mm depth of cut and a 19.05 mm Weldon connection. Its manufacturer series uses spiral flutes for chip removal and lists hardened steels, stainless steels and high-tensile steels among its applications. Confirm the workpiece grade, hardness, machine and cutting procedure before ordering.

البيانات المرجعية المسجلة

Exact order identity
HMS.180; manufacturer article 23003501801004; EAN 8718375393857Exact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting material
tungsten carbide tippedExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Cutting diameter
18 mmExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Depth of cut
35 mmExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Connection
3/4 in (19.05 mm) WeldonExact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.
Series geometry
Manufacturer describes a spiral flute for chip removal in the TCT 35 mm series.Exact HMS.180 metric execution only. Machine, workpiece grade/hardness, pilot pin, lubrication and cutting procedure require verification. No RPM, feed, tolerance or tool-life guarantee inferred.

التطبيقات

  • Annular drilling in the manufacturer-listed hardened, stainless and high-tensile steel application scope after checking the exact grade and procedure.

التكوينات

  • HMS.180 · Scope: 18 mm diameter × 35 mm metric DoC; 19.05 mm Weldon; tungsten carbide tipped only.