Request a Quote

Discuss a Project or describe your requirements below. We'll review your specification, confirm availability and reply with a quotation.

Quincy QPNC-297 Non-Cycling Refrigerated Air Dryer

The recorded reference below stays separate from the equipment, spare part and specifications you request.

Selected catalogue reference

QPNC-297 is a Quincy non-cycling refrigerated compressed-air dryer. Its published row rates 297 CFM at 100 PSIG and specifies 1 1/2" NPT connections; duty correction and the exact electrical execution remain part of selection.

Rated flow
297 CFM at 100 PSIG; separate metric column 505 m³/h at 7 BAR

CFM column at 100 PSIG; separate m3/hr column at 7 BAR. These labels are retained; no SCFM/FAD equivalence inferred. kW includes air-cooled fan motors.

Standard electrics and full-load input
230/1/60 V / phase / Hz; 2 kW

CFM column at 100 PSIG; separate m3/hr column at 7 BAR. These labels are retained; no SCFM/FAD equivalence inferred. kW includes air-cooled fan motors.

Maximum pressure and connection
203 PSIG; 1 1/2" NPT inlet/outlet

Exact listed execution; connection spelling retained from source.

Dimensions
23 × 23 × 35 in (length × width × height)

Published dimensions; installation/service clearances require confirmation.

Refrigerant
R513a

Exact table row; no refrigerant alternatives inferred.

Correction reference points
100 PSIG pressure factor 1.0; 100°F inlet factor 1.0; 80°F ambient factor 1.0; 37–39°F dew-point correction factor 1

Only printed QPNC 13–636 bands apply; actual site correction is still required.

Reference applications
  • Compressed-air moisture control upstream of pneumatic equipment and distribution systems.
  • Reduction of moisture-related corrosion risk where the specified refrigerated-dryer duty meets the process requirement.
Reference configurations
  • QPNC-297 · Electrics: 230/1/60 · Connection: 1 1/2" NPT · Refrigerant: R513a

Requested values remain separate from recorded product specifications.

Describe the actual equipment or spare part, installed maker/model/serial, quantities, units and specifications you need.

1. Contact & company details

Tell us who to contact and where your company is based. Fields marked * are required.

Choose the calling country, then enter your national phone number. Your phone country may differ from your company country.

Company address Optional

2. Product / equipment details
3. Technical & delivery requirements (optional)
Requirements
Requirement files (optional)

0 files selected

    Up to 5 files, 10 MB each. PDF, JPG/JPEG, PNG, WebP, CSV, XLSX or DOCX. Files are private and supplement your requirements. They are retained while your request is active and for 24 months after closure. Please reselect files if the form needs a correction.

    4. Review & submit

    Check your contact details, selected product and requirements before sending.

    We review your specification before confirming a quotation.