Explore equipment, consumables and technical specifications for industrial procurement. Select your requirements and request a quotation.
Wireline Stuffing Boxes & Wipers
Reference configuration — confirm the required execution when enquiring.
Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.
- Packing operation / تشغيل الحشوة
- Hydraulic / هيدروليكي — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Sheave diameter / قطر البكرة
- 14 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Working pressure / ضغط التشغيل
- 10,000 psi — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Request a quotation →
Wireline Tool Traps & Catchers
Reference configuration — confirm the required execution when enquiring.
Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.
- Pressure rating / تصنيف الضغط
- 10,000 psi — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Service designation / توصيف الخدمة
- H₂S / كبريتيد الهيدروجين H₂S — Source table designation; no certification or site suitability is asserted. / توصيف جدول المصدر؛ لا يتضمن تأكيدا لشهادة أو ملاءمة الموقع.
- Release / التحرير
- Hydraulic pressure required / يتطلب ضغطا هيدروليكيا — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Request a quotation →
Wireline Tool Traps & Catchers
Reference configuration — confirm the required execution when enquiring.
Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.
- Actuation / التشغيل
- Hydraulic / هيدروليكي — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Service / الخدمة
- Standard / قياسية — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Inside diameter / القطر الداخلي
- 2.50 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Request a quotation →
Drilling Stabilizers
Reference configuration — confirm the required execution when enquiring.
Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.
- Stabilizer outside-diameter class / فئة القطر الخارجي للمثبت
- 6–6 3/4 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Body outside-diameter range / نطاق القطر الخارجي للجسم
- 4 1/8–4 3/4 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Body inside-diameter range / نطاق القطر الداخلي للجسم
- 2–2 1/4 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
Request a quotation →
Treating Iron & Union Fittings
Reference configuration — confirm the required execution when enquiring.
Technical example for this source execution only. Confirm the final dimensions, connections, material and service conditions for the enquiry. / مثال فني لهذا التكوين الوارد في المصدر فقط. يرجى تأكيد الأبعاد والوصلات والمادة وظروف الخدمة النهائية للطلب.
- Nominal size / المقاس الاسمي
- 2 in — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Construction / الإنشاء
- One piece, integral union ends; no welds or threads / قطعة واحدة بنهايات وصلات متكاملة؛ بلا لحام أو قلاوظ — This source execution only. / لهذا التكوين الوارد في المصدر فقط.
- Cold working pressure / ضغط التشغيل البارد
- 15,000 psi — Selected standard-service table execution; source sour-service ceiling is separate and not assigned here. / تكوين الجدول المحدد للخدمة القياسية؛ حد الخدمة الحامضية في المصدر منفصل ولا ينطبق هنا.
Request a quotation →
Wireline Gauging & Tubing Cleaning Tools
Reference configuration — confirm the required execution when enquiring.
Documented example execution; listed values apply only to this example. / مثال تنفيذ موثق؛ تنطبق القيم المدرجة على هذا المثال فقط.
- Size range / نطاق المقاس
- 1.0–1.5 in
- Fishing neck outside diameter / القطر الخارجي لعنق الصيد
- 1.187 in
- Top connection / الوصلة العلوية
- 15/16-10 UN
Request a quotation →
Electric & Orbital Pipe Cutting and Beveling
Reference configuration — confirm the required execution when enquiring.
Reference configuration for standard mandrel pipe ID mounting.
- standard mandrel pipe ID mounting
- 57.66–171.96 mm
- Standard machining maximum OD
- 177.8 mm
- Wall capability
- 19.05 mm
Request a quotation →
Pneumatic Pipe Cutting and Beveling
Reference configuration — confirm the required execution when enquiring.
Reference configuration for standard mandrel pipe ID mounting.
- standard mandrel pipe ID mounting
- 57.66–171.96 mm
- Standard machining maximum OD
- 177.8 mm
- Wall capability
- 19.05 mm
Request a quotation →
Hydraulic Pipe Cutting and Beveling
Reference configuration — confirm the required execution when enquiring.
Reference configuration for standard mandrel pipe ID mounting.
- standard mandrel pipe ID mounting
- 57.66–171.96 mm
- Standard machining maximum OD
- 177.8 mm
- Wall capability
- 19.05 mm
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron-based High Carbon Alloy
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Iron-Based Metal Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Chrome Aluminum
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Chrome Boron
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Chrome Carbon
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Chrome Nickel
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Chrome Nickel
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
Specialty Alloy Spray Wires
Reference configuration — confirm the required execution when enquiring.
Exact source wire execution and listed diameters. Neutral TSW identifiers are catalogue references, not manufacturer model codes. State the actual required grade, construction, equipment and procedure separately.
- Material description
- Iron Nickel Chrome
- Source wire diameters
- 1/16 in (1.6 mm)
- Source process
- Arc thermal spray
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 32 mm
- Stroke
- 50 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 32 mm
- Stroke
- 200 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 40 mm
- Stroke
- 50 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 40 mm
- Stroke
- 200 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 50 mm
- Stroke
- 50 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 50 mm
- Stroke
- 200 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 63 mm
- Stroke
- 50 mm
- Action
- Double acting; magnetic piston
Request a quotation →
ISO 15552 Profile Cylinders
Reference configuration — confirm the required execution when enquiring.
Standard magnetic, double-acting execution with adjustable pneumatic cushioning. These two listed strokes are standard references. Longer/custom strokes require a separate engineering and supply check.
- Bore
- 63 mm
- Stroke
- 200 mm
- Action
- Double acting; magnetic piston
Request a quotation →
