TIG Cold-Wire Feeders

Compare documented feeding-unit supply, wire diameter and direct-connection current ratings. Specify the wire speed, drive rolls, torch and installed machine interface you need.

Configure your requirementsRequest spare parts →
Neutral source-derived family illustration of the pictured feeding unit. Not voltage, included wire/rolls, connector pinout, display-setting, complete system or installed-fit evidence.
Neutral source-derived family illustration of the pictured feeding unit. Not voltage, included wire/rolls, connector pinout, display-setting, complete system or installed-fit evidence.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

2 documented configurations. Review one specification at a time; your custom requirements are retained.

Generic family illustration; not this reference model or configuration. Neutral source-derived family illustration of the pictured feeding unit. Not voltage, included wire/rolls, connector pinout, display-setting, complete system or installed-fit evidence.
Generic family illustration; not this reference model or configuration. Neutral source-derived family illustration of the pictured feeding unit. Not voltage, included wire/rolls, connector pinout, display-setting, complete system or installed-fit evidence.

FEED-01 · 230 V / 50 Hz · TIG Cold Wire

Source-defined feeding unit execution. FEED keys are catalogue references, not maker models. Specify actual system interfaces and contents independently.

Source process
TIG cold-wire feeding
Source inlet supply
230 V / 50 Hz ±10 %
Source current condition
300 A at 100 % duty cycle AND direct connection
Source wire diameter
0.8–1.6 mm
Source delay fuse
2 AT
Source protection class
IP21s
Source mass
17 kg
Source dimensions (L × W × H)
674 × 260 × 408 mm
Source assembly scope
Feeding unit without wire feed rolls
System scope
Rolls, torch, interconnection cables, controls and optional cooling require separate execution verification; not included by a system illustration.
Rating basis
Source technical data according to EN 60974-7; source rating basis only, not supplied-item certification.
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Choose a reference or leave blank for the actual feeder or spare. FEED identifiers are catalogue choices.

Specify a complete feeding unit, an actual installed spare or identification assistance.

References cover TIG cold-wire feeding. Hot-wire or another process requires separate verification.

Copy the exact required unit model and revision independently of the reference.

Specify the actual current and current path; reference300A/100% applies with direct connection.

Enter the actual duty requirement and conditions in notes.

Enter the actual diameter; roll and liner execution needs verification.

Provide actual alloy and construction independently of the source diameter.

Additional dimensions and application details

Specify actual base material.

Enter the required speed independently. Reference feed-speed capability needs confirmation.

Enter actual mains voltage; selecting a reference does not establish suitability for another supply.

State actual frequency; the listed source executions are50Hz.

Choose manual or automated use; complete system integration needs verification.

Source feeder assemblies exclude feed rolls. Identify the exact needed rolls and wire.

State actual U/V/smooth/driven or other arrangement; no universal roll substitution.

Copy actual torch and feed-attachment model.

Enter actual metres; source system diagrams do not define included cable length.

Provide actual power-source, feeder and torch interfaces for verification.

Identify actual control module, signals and remote functions.

State the installed cooler if applicable; a system diagram does not include a cooler in the feeder assembly.

State actual gas and welding conditions for system review.

State actual procedure and requested qualifications; none is inherited from source ratings.

Describe actual site and operating conditions separately.

Specify unit, rolls, torch, cables, cooler and spare quantities separately. A photo does not establish contents.

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Enter the actual installed maker.

Copy the exact installed model and revision.

Include the actual installed serial number.

Copy the exact actual part number and suffixes; no generic substitution.

Describe the actual spare independently of the source unit reference.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Manual and automated TIG cold-wire feeding enquiries, subject to the actual torch, power source and interconnection execution.

Selection guidance

Search a reference or leave it blank for your actual unit or spare. Enter site voltage, frequency, feed speed and component details independently.

Technical notes

Listed feeding-unit assemblies exclude wire feed rolls. Rolls, torch, cables, control functions and optional cooling are separate system requirements. Feed-speed capability and installed-system applicability need confirmation.