MIG/MAG Welding Machines

Compare 230 V and 400 V three-phase input configurations of a 270 A pulsed MIG/MAG power source. Review current at the required duty cycle, feeder arrangement and spool size before preparing your request.

Configure your requirementsRequest spare parts →

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

2 documented configurations. Review one specification at a time; your custom requirements are retained.

Pulsed MIG/MAG 270 A · three-phase 400 V

Power-source reference only. Torch, cooler, cables and feeder package must be specified separately. Ratings at different processes or ambient temperatures are not interchangeable. Duty ratings shown are MIG/MAG ratings. Wire diameter and torch selection require the specified consumable and torch execution.

Processes
MIG/MAG, pulsed MIG/MAG, MMA and TIG DC Lift
Supply
3 × 400 V ±15% · 50/60 Hz
Maximum input current
13.1 A
Maximum input apparent power
9.1 kVA
Adjustment range
3–270 A
MIG/MAG duty cycle at 40 °C
270 A at 45%; 250 A at 60%; 230 A at 100%
MIG/MAG duty cycle at 25 °C
270 A at 100%
Wire feeder
Built-in · four drive rolls
Wire speed
0.5–22.0 m/min
Spool outside diameters
200 or 300 mm
Dimensions
620 × 270 × 460 mm
Power-source weight
23.7 kg
Ingress protection
IP23S
Reference basis
Technical sheet EN 00, pages 1–2
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Optional. For existing-equipment spares, leave the reference unselected and enter the manufacturer and equipment identity below.

State current, duty percentage and ambient temperature together, e.g. 200 A at 60% and 40 °C.

For example: the exact stainless or carbon steel grade on your drawing.

Additional dimensions and application details

Describe joint geometry, base metal, shop/site duty and WPS requirements; thickness alone does not establish welding capacity.

For example: earth lead, holder, regulator, remote control, cooler, trolley and torch consumables.

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Add the nameplate, part photo or drawing in the RFQ attachments.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Fabrication, installation and maintenance welding. Specify the actual base-metal grade, joint and welding procedure for equipment selection.

Selection guidance

Compare supply voltage, phase, frequency, welding process and current at the required duty cycle. Specify electrode or wire diameter, shielding gas, feeder and torch cooling separately.

Technical notes

Reference ratings apply to the stated process, voltage and ambient temperature. A material or thickness request is not a validated welding procedure. Spare-parts requests can be submitted without selecting a new-machine reference; include manufacturer, model, serial number, part number and identification photos.