Workshop Presses

Compare manual hydraulic, motorized hydraulic and arbor presses for bearing assembly, bushing removal, straightening and workshop maintenance. Explore 11 manufacturer-documented configurations, then enter the force, working space and tooling your job needs.

Configure your requirements Request spare parts →

Manufacturer KNWP M photograph; 15 M and 30 M use a shared series image. Dimensions and tooling follow the selected specification.

Manufacturer KNWP H 60 photograph. Tooling and the supplied package are selected separately.

Manufacturer KNWP H 100 photograph. Tooling and the supplied package are selected separately.

Manufacturer series photograph showing KNWP H 100, also used on the H 160 page. H 160 ratings are specified below.

Manufacturer KNWP H 200 photograph. Tooling and the supplied package are selected separately.

Manufacturer arbor-press series photograph. The pictured base is not included; exact dimensions follow the selected model.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

KNWP 15 M · Manual hydraulic · 15 t

Metric international configuration. Throat width is the manufacturer working-width dimension; it is separate from front-to-back opening and daylight. Only the 50 M has the stated horizontal cylinder adjustment. Tooling and the supplied package are selected for the job.

Press type: Manual hydraulic
Published press force: 15 t
Working width: 560 mm
Hydraulic stroke: 160 mm
Hydraulic pressure (max.): 382.2 bar
Hydraulic tank: 1.65 L
Overall dimensions (L × W × H): 0.83 × 0.60 × 1.93 m
Machine mass: 117 kg
Table: Height adjustable
Cylinder positioning: Fixed lateral position
Operation: Hand or foot pump control

Technical source ↗ Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Request type

Reference configuration

Required press type

Required press force

Enter the force and select its unit separately.

Force unit

Select the unit when entering a force. If unsure, request help in the quotation form. No unit is assumed from the reference model.

Required working width (mm)

Required ram stroke / travel (mm)

Required open height / daylight (mm)

Usable distance between ram and support, including tooling.

Additional dimensions and application details

Required throat depth (mm)

Required front-to-back frame opening (mm)

Workpiece length (mm)

Workpiece width / diameter (mm)

Workpiece height (mm)

Workpiece mass (kg)

Workpiece material

Material grade / hardness

Operation, fit and production duty

For example bearing removal, interference fit, shaft straightening or broaching. Include the load arrangement.

Required approach / pressing speed and cycle time

Cylinder positioning and table adjustment

Supply voltage

Supply frequency (Hz)

Supply phase

V-blocks, press plates, mandrels, broaches and dies

Floor space, access and installation requirements

Inspection and documentation requirements

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Existing equipment manufacturer

Existing model / type

Serial / identification number

Equipment date / revision code

Required part number

Part description and drawing reference

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Press fitting and removal of bearings and bushes, shaft and component straightening, pin assembly and arbor-press broaching with suitable tooling.

Selection guidance

Start with the operation and workpiece. Compare press force, working width or throat depth, ram travel and available opening separately. Hydraulic references cover 15–200 t; arbor references publish 5–20 kN. Specify the required daylight, support arrangement, workpiece material and supply execution for selection.

Technical notes

The working envelope and tooling must accommodate the component throughout the operation. Reference dimensions describe each listed model; buyer-entered dimensions remain your requirement. For an existing press, add its manufacturer, model, serial or date code, and the required part or drawing reference.