Hydraulic Equipment

Select a hydraulic hand pump by operating pressure, usable oil capacity and single- or double-acting cylinder compatibility. Compare seven documented pump configurations, then describe the cylinder, connections and application you need.

Configure your requirements Request spare parts →

Manufacturer P141 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P142 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P202 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P391 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P392 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P802 pump photograph. Hoses, gauges and cylinders are selected separately.

Manufacturer P842 pump photograph. Hoses, gauges and cylinders are selected separately.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

P141 · Single-speed hand pump · 20 in³

Pump only; hoses, cylinders, couplers, gauges and kits are selected separately. Current manufacturer US product-page ratings; outlet type cross-checked with L1763 Rev K, page 3. Oil displacement is per handle stroke, not flow per minute. Confirm the connected cylinder volume and the lowest component pressure rating.

Pump type: Single speed
Maximum operating pressure: 10,000 psi / 700 bar
Cylinder compatibility: Single-acting
Usable oil capacity: 20 in³
Outlet port: 1/4 NPTF
Oil displacement per stroke: 0.055 in³/stroke
Maximum handle effort: 72 lbf
Power source: Manual
Control valve: Manual release valve

Technical source ↗ Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Request type

Reference configuration

Choose a pump reference or leave open for equipment selection.

Required equipment

Listed ratings apply to hand pumps. Other equipment requires a separate technical selection.

Required working pressure (bar)

Cylinder / tool action

Required usable oil volume (cm³)

Required cylinder force (kN)

Force is separate from pump pressure; include the cylinder model and loading arrangement.

Required cylinder stroke (mm)

Additional dimensions and application details

Number of cylinders

Cylinder model and oil volume

Required flow / cycle time

State units, pressure and cycle. Pump displacement per stroke is not a litres-per-minute rating.

Requested pump drive

Voltage, phase, frequency or air supply

For powered equipment enquiries. The listed reference pumps are manual.

Port size, thread and coupler type

Hose length, pressure rating and end connections

Hydraulic oil / fluid requirement

Application, load and duty cycle

Site environment and temperature

Gauges, manifolds, valves and accessories

Inspection and documentation requirements

Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Existing equipment manufacturer

Existing model / type

Serial / identification number

Equipment date / revision code

Required part number

Part description and marking

Seal material / fluid compatibility for spares

Use the original equipment identity and date code to identify repair parts.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Workshop maintenance, controlled cylinder actuation, positioning and hydraulic-tool applications requiring a compatible pump, cylinder and connection system.

Selection guidance

Match pump oil volume to the cylinder and hose requirement. Two-speed pumps provide a higher-volume approach stage and a lower-volume high-pressure stage. Specify the working pressure, cylinder stroke, required force, oil and couplings for the complete assembly.

Technical notes

Pump pressure alone does not establish lifting force or a complete system rating. Use the lowest rated component as the pressure limit. Hydraulic cylinders used to raise loads require suitable mechanical support. For spares, include the original manufacturer, model, serial number and date code.