Gas Lift Mandrels

Side-pocket and conventional mandrel configurations selected for the completion design.

Configure your requirements
Longitudinal sectional drawing of an oval side-pocket mandrel for a 1-inch valve
Longitudinal view of the welded-swage oval side-pocket execution; the separate cross-section and adjacent integral-swage execution are not included. Final size and connections require confirmation.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

Oval Side-Pocket Mandrel, 2-3/8 in Tubing / 1 in Valve / ماندريل بيضاوي بجيب جانبي لأنبوب 2-3/8 بوصة وصمام 1 بوصة

Documented example execution; listed values apply only to this example. / مثال تنفيذ موثق؛ تنطبق القيم المدرجة على هذا المثال فقط.

Tubing size / مقاس الأنبوب
2-3/8 in
Valve outside diameter / القطر الخارجي للصمام
1.0 in
Body shape / شكل الجسم
Oval / بيضاوي
Major outside diameter / القطر الخارجي الأكبر
4.25 in
Minor outside diameter / القطر الخارجي الأصغر
2.92 in
Inside diameter / القطر الداخلي
2.00 in
Drift diameter / قطر المرور
1.901 in
Upper pocket dimension E / البعد العلوي للجيب E
1.027 in
Lower pocket dimension F / البعد السفلي للجيب F
1.027 in
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Optional example only. Its values apply only to the stated execution; confirm the final configuration in your quotation.

Describe the operating task and installation context.

Include size, length, connection type and drawings where applicable; state units.

State working pressure, temperature and units. Distinguish working and test pressure.

Describe the fluid, well conditions and any corrosive or sour-service requirements.

For matching equipment, provide its maker, model, serial number, interface or drawing. Compatibility must be confirmed.

Specify required drawings, material records, test reports, standards and inspection scope. No certification is presumed.

State whether a complete item, assembly, accessory or spare part is needed, with part references if available.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Selection guidance

Specify the application, size, connection, operating pressure and temperature, fluid or service conditions, quantity and required documentation. Confirm the exact configuration before ordering.

Technical notes

The specification tables below describe documented example configurations only. Values are not interchangeable between executions; final dimensions, interfaces, materials and service requirements must be confirmed. Configuration enquiry only. Ratings, materials, connections and standards are specific to the selected execution and must be confirmed. No cross-model interchangeability or site approval is implied.