Polyurethane Pneumatic Tubing

Choose polyurethane tube by outside and inside diameter, bend radius, operating temperature and pressure. Specify required length, colour and routing conditions.

Configure your requirementsRequest spare parts →
Representative polyurethane pneumatic tubing illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.
Representative polyurethane pneumatic tubing illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

7 documented configurations. Review one specification at a time; your custom requirements are retained.

Polyurethane tube · 2 mm OD × 1.2 mm ID

Metric polyurethane tube. OD, ID and minimum bending radius are a linked size combination. Pressure is temperature-dependent. Water, surge, vacuum and fitting compatibility require separate checks.

Outside diameter
2 mm
Inside diameter
1.2 mm
Minimum bending radius at 20°C
4 mm
Maximum pressure at 20°C
0.8 MPa
Maximum pressure at 40°C
0.65 MPa
Maximum pressure at 60°C
0.5 MPa
Air temperature
−20–60°C; no freezing
Industrial-water temperature
0–40°C; no freezing
Material
Polyurethane
Roll / colour
Specify length and colour; execution-specific supply to be confirmed
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Flexible pneumatic circuits, machine connections and control tubing.

Selection guidance

Seven metric OD/ID pairs from 2/1.2 to 16/10 mm are shown. Choose the actual pair rather than treating ID and OD as freely interchangeable. State continuous or moving service, routing radius, colour and roll length separately.

Technical notes

The same tube is limited to 0.8 MPa at20°C, 0.65 MPa at40°C and0.5 MPa at60°C. Air and water temperature ranges differ. No coiled-tube, food-contact, flame-retardant, cleanroom or outdoor resistance claim is inferred.