Pneumatic Pressure Regulators

Select the inlet connection and regulated outlet range, then specify flow and acceptable pressure variation. Compare relieving regulators with 0.5–4 and 0.5–10 bar setting ranges.

Configure your requirementsRequest spare parts →
Representative pneumatic pressure regulators illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.
Representative pneumatic pressure regulators illustration. Not an exact model photograph; refer to the selected dimensions and supplied accessories.

Sizes & capacities

Manufacturer reference configurations

Compare published specifications for each configuration, then select a reference or enter your own requirements. Supply and the final configuration are confirmed in the quotation.

10 documented configurations. Review one specification at a time; your custom requirements are retained.

G3/8 · 0.5–10 bar outlet · relieving

Pressure regulator execution with a defined adjustment range. Inlet pressure, regulated pressure, flow and droop are different requirements. Flow is selected against the applicable characteristic curve.

Port thread
G3/8
Outlet setting range
0.5–10 bar
Maximum inlet pressure
16 bar
Relieving
Relieving execution
Gauge
Built-in 0–12 bar
Gauge connection
G1/8
Temperature
−5–50°C at ≤16 bar; −5–60°C at ≤10 bar
Mounting
Vertical in-line, wall or panel
Datasheet revision
2026/02
Select this reference →

Your specification

Configure your product requirement

Enter the capacity and site requirements you need. Your selections carry into the RFQ and remain editable before submission.

Essential operating requirements

Select a documented reference, or leave blank and describe an unlisted requirement. Reference ratings remain separate from your requested specification.

Additional dimensions and application details
Equipment identification & spare parts

Identify the installed equipment and the part you need. Add nameplate photos, drawings or a parts-list extract in the RFQ attachments step.

Next: contact details, quantity and delivery. Leave unknown requirements blank and request help in the RFQ.

Applications

Point-of-use pressure control for air circuits, machines and tools.

Selection guidance

State inlet pressure, required outlet pressure at operating flow, gauge range, relief behaviour and available mounting space. The source also lists a 0.5–7 bar execution for the smaller body only; request that separately.

Technical notes

Maximum inlet pressure is not the outlet setting range. No fixed flow rating is inferred from a connection size. Confirm gauge, lockout and non-relieving execution requirements before quotation.