Source-backed reference

Quincy QHP-850 Heated Purge Desiccant Air Dryer

Reference information only. Confirm the actual equipment, configuration and supplied contents in the quotation. This reference does not confirm stock, installed compatibility or a certified supplied item.

Enquire about this reference

Representative image from another reference in this family; not this model. Source reference illustration — Representative image from another reference in this family; not this model. Retained source illustration. Model candidate illustration; exact execution and configuration are not approved.

Reference overview

QHP-850 is a Quincy heated-purge desiccant dryer. The manufacturer lists 850 CFM at 100 PSIG, with purge consumption stated separately. Select the drying duty, electrical execution and installation arrangement against the exact model data.

Recorded reference facts

Rated inlet flow and purge: 850 CFM at 100 PSIG; purge 85 CFMPublished inlet-flow and purge columns remain separate; no net-flow subtraction or SCFM equivalence inferred.
Electrical execution and average input: 460/3/60 V / phase / Hz; 7.9 kWExact published execution; other series-level electrical options are not silently combined.
Connection, dimensions and weight: 3" RF inlet/outlet; 76 × 47 × 106 in; approximate 2288 lbLength × width × height; dimensions for the basic dryer.
Listed pressure-dew-point alternatives: -40 or -100 °FAlternatives require corresponding desiccant/duty selection; not a single combined execution or unrestricted guarantee.
Duty correction references: 100 PSIG pressure factor 1.0; 100°F inlet temperature factor 1.0Use the correct series document and actual site duty; factors are not imported from other dryer groups.

Applications

Industrial compressed-air drying where low moisture content is required to reduce corrosion, frozen-line and process-quality risks.

Configurations

QHP-850 · Technology: heated-purge · Electrics: 460/3/60 · Connection: 3" RF