Source-backed reference

Quincy QRHT 50 High-Temperature Refrigerated Air Dryer

Reference information only. Confirm the actual equipment, configuration and supplied contents in the quotation. This reference does not confirm stock, installed compatibility or a certified supplied item.

Enquire about this reference

Source reference illustration — Retained source illustration. Model candidate illustration; exact execution and configuration are not approved.

Reference overview

QRHT 50 is a Quincy high-temperature refrigerated air dryer incorporating aftercooling, moisture separation, drainage and a coalescing filter. Select its flow against the required pressure dew point: the manufacturer publishes separate 50°F and 40°F PDP duties.

Recorded reference facts

Published flow: 50 CFM at 100 PSIGMain table CFM label retained separately from SCFM dew-point table.
Inlet flow by pressure dew point: 50 SCFM at 50°F PDP; 40 SCFM at 40°F PDPSCFM and PDP conditions copied as printed; no equivalence to the main CFM column inferred.
Electrical and pressure limits: 115/1/60 V / phase / Hz; 0.84 kW; maximum 232 PSIGExact model electrical execution.
Physical connections: 1 NPT (inches); 22.6 × 18.1 × 31 in; approximate weight 109 lbDimensions length × width × height; service clearances not included.
Refrigerant and supplied filter: R513a; coalescing filter suppliedSource says coalescing filter supplied for all listed QRHT models.

Applications

Treatment of hot compressed air where integrated aftercooling, drying and filtration are required.

Configurations

QRHT 50 · Electrics: 115/1/60 · Connection: 1 NPT