TIG DC HF 180 A · single-phase 230 V
Power-source reference only. Torch, cooler, cables and feeder package must be specified separately. Ratings at different processes or ambient temperatures are not interchangeable. DC TIG only: no AC welding rating is inferred. The sheet also lists 115 V input, but does not provide its duty table here; this selection is 230 V only.
- Process covered
- DC TIG with high-frequency ignition; MMA also supported
- Supply for these duty ratings
- 1 × 230 V · 50/60 Hz
- Adjustment range
- 3–180 A
- TIG duty cycle at 40 °C, 230 V
- 180 A at 35%; 160 A at 60%; 140 A at 100%
- TIG duty cycle at 25 °C, 230 V
- 180 A at 70%; 160 A at 100%
- Open-circuit voltage, MMA / TIG
- 80 / 106 V DC
- Dimensions
- 410 × 150 × 330 mm
- Power-source weight
- 9.4 kg
- Ingress protection
- IP23S
- Reference basis
- Technical sheet EN 01, page 2; 21/03